Connecting The Device; Dmx-512 Connection; Control Panel - HQ Power HQST10001 Bedienungsanleitung

6.3

Connecting the Device

Power
Connect the device to the mains with the power plug.
Power all devices directly off a grounded switched circuit.
Do not connect the device to a rheostat or dimmer circuit, even when using the rheostat or dimmer
channel solely for 0 % to 100 % switching.

Have a qualified electrician carry out the electric connection.

DMX-512 Connection


When applicable, connect an XLR cable to the female XLR output of a controller (not incl.) and the
other side to the male XLR input of the device. Multiple devices can be linked through serial linking.
The linking cable shall be a dual core, screened cable with XLR input and output connectors.

A DMX terminator is recommended for installations where the DMX cable has to run a long distance
or is in an electrically noisy environment (e.g. discos). The terminator prevents corruption of the
digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω
resistor between pins 2 and 3, which is then plugged into the XLR output socket of the last device in
the chain.
7. Operation
The device can be used in the following modes:

stand-alone mode

master/slave

with a DMX-512 controller.
7.1

Control Panel

Access the control panel functions using the four panel buttons located around the display. From left to
right:
button function


MENU


UP


DOWN


ENTER

Menu
main menu
V. 01 – 12/10/2016
access the menu
return to a previous menu option
hold pressed to enter the hidden menu
scroll through the menu options in ascending order
increase value
scroll through the menu options in descending order
decrease value
select menu option
store the current menu or option within the menu
A001
CH29
SH01
SP
SnoF
Sn01
o255
St01
SLoF
rdoF
HQST10001
sub menu
001-512 (address setting)
4/25/30CH (channel modes)
ON/OFF (preset shows)
01-10 (preset shows running speed)
ON/OFF (sound activation)
01-10 (sound activation sensitivity)
000-255 (dimmer)
01-10 (strobe speed)
ON/OFF (slave)
ON/OFF (reverse display)
6 ©Velleman nv