Ordering Information; Spare Parts; Product Disposal - HTL SWIFTPET PRO Handbuch

11 - ORDERING INFORMATION

The SWIFTPET PRO comes with a universal charger and a set of adapters in different versions:
EU, US, UK and AUS. Choose your country used adapter and connect to the housing.
To mount the adapter, it should be inserted into the slots of the housing in the direction of the
arrow (1), until you hear a click (fig. 6).
To remove or change the adapter, simply press the "PUSH" button in the direction of the
arrow (2), then holding the button down, remove the adapter in the direction of the arrow (3).
Catalogue no. 0390

12 - SPARE PARTS

Item
Part name
in fig. 1
F Nosepiece
G Pipette holder
H Membrane filter 0.2 μm
Membrane filter 0.45 μm
J Connector gasket
L Battery - NiMH, AAA, 1.2V
M Charging stand
N Charger 9V: EU, US, UK, AU

13 - PRODUCT DISPOSAL

According to Directive 2012/19/EU of the European Parliament and of the Council of
4th of July 2012 on waste electrical and electronic equipment as amended, pipette con-
troller SWIFTPET PRO is marked with the crossed-out wheeled bin and must not be dis-
posed of with domestic waste.
In accordance with the requirements of Directive 2006/66/EC of 6 September 2006 on
batteries and accumulators and waste batteries and accumulators, batteries
must be disposed of in accordance with national regulations.
The crossed out wheeled bin symbol is printed in the product instruction
manual and on the packaging. For information on product recycling,
please go to http://www.htl.com.pl/recycling2.php
All rights reserved. Product described in this manual is subject to availability and technical modification. Errors excepted.
PZ HTL S.A. reserves the right to improve, enhance or otherwise modify its products without prior notification.
© 2015 PZ HTL S.A.
Catalogue no.
29053
29054
9023
9024
9025
29066
29056
9010
ENGLISH
Number of
pie ces in pack
1
1
1
1
1
3
1
1
8