Herunterladen Inhalt Inhalt Diese Seite drucken

Daily Use; Environmental Protection - Zanussi ZFP18400WA Benutzerhandbuch

Vorschau ausblenden Andere Handbücher für ZFP18400WA:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 37
3.
Make sure that you can access the mains plug of
the appliance.
4.
Do not pull the mains cable.
5.
If the power plug socket is loose, do not insert the
power plug. There is a risk of electric shock or fire.
6.
You must not operate the appliance unless the
interior light cover
This appliance is heavy. Care should be taken when
moving it.
Do not remove or touch items from the freezer
compartment if your hands are damp/wet, as this
could cause skin abrasions or frost/freezer burns.
Avoid prolonged exposure of the appliance to direct
sunlight.

Daily use

Do not put hot objects on the plastic parts in the
appliance.
Do not store flammable gas and liquid in the
appliance, because they may explode.
Do not place food products directly against the air
outlet on the rear wall.
Frozen food must not be re-frozen once it has thawed.
Store pre-packed frozen food in accordance with the
frozen food manufacturer's instructions.
Appliance manufacturer's storage recommendations
should be strictly adhered to. Refer to relevant
instructions.
Do not place carbonated or fizzy drinks in the freezer
compartment as it creates pressure on the container,
which may cause it to explode, resulting in damage
to the appliance.
Ice lollies can cause frost burns if consumed straight
from the appliance.
Care and cleaning
Before maintenance, switch off the appliance and
disconnect the mains plug from the mains socket.
Do not clean the appliance with metal objects.
Do not use sharp objects to remove frost from the
appliance. Use a plastic scraper.
1)
is in place.
2)
Installation
Important! For electrical connection carefully follow
the instructions given in specific paragraphs.
Unpack the appliance and check if it is damaged.
Do not connect the appliance if it is damaged. Report
possible damages immediately to the place you
bought it. In that case retain packing.
It is advisable to wait at least four hours before
connecting the appliance to allow the oil to flow back
in the compressor.
Ensure adequate air circulation around the appliance,
otherwise it could overheat. To achieve sufficient
ventilation follow the instructions relevant to
installation.
Wherever possible the back of the product should be
against a wall to avoid touching or catching warm
parts (compressor, condenser) to prevent possible
burn.
The appliance must not be located close to radiators
or cookers.
Make sure that the mains plug is accessible after the
installation of the appliance.
Connect to drinkable water supply only.
Service
Any electrical work required for the servicing of
the appliance should be carried out by a qualified
electrician or competent person.
This product must be serviced by an authorized Service
Centre and only genuine spare parts must be used.

Environmental Protection

This appliance does not contain gases which could
damage the ozone layer, in either its refrigerant
circuit or insulation materials. The appliance should not
be disposed of with urban refuse and rubbish. The
insulation foam contains flammable gases: the
appliance should be disposed of according to the
regulations obtained from your local authority. Avoid
damaging the cooling unit, especially at the rear near
the heat exchanger. The materials used on this
appliance marked by the symbol
1) If a light cover is included
2) If the appliance is Frost Free
3) If a water connection is included
3)
are recyclable.
45

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis