Parts Identification - Sony DSRM-10 Bedienungsanleitung

Parts Identification

Parts Identification
Note that the effect of some controls on this unit may
depend on the type of recorder or player connected.
1 STOP button
2 REC button
3 PAUSE button
4 REW button
5 PLAY button
6 F FWD button
1 STOPxbutton
Press to stop the tape.
2 RECz(recording) button
For recording, press the PLAYBbutton 5 while
holding down this button.
3 PAUSEXbutton
Press to stop the tape momentarily.
4 REWm(rewind) button
Press to rewind the tape.
When the tape is being rewound, pressing this button
again and holding it sets high-speed search mode,
switching the tape speed to 32 times normal speed (for
the DSR-85/85P/80/80P/60/60P only). The high-speed
search mode stays as long as you hold this button.
5 PLAYBbutton
Press to play the tape back.
Pressing the RECzbutton 2 while holding down this
button starts recording.
10
STOP REC PAUSE
REW PLAY F.FWD
JOG/SHUTTLE
6 F FWDM(fast forward) button
Press to fast forward the tape.
When the tape is being fast forwarded, pressing this
button again and holding it sets high-speed search
mode, switching the tape speed to 32 times normal
speed (for the DSR-85/85P/80/80P/60/60P only). The
high-speed search mode stays as long as you hold this
button.
7 JOG/SHUTTLE button/indicator
Press to play the tape in jog/shuttle mode. The
indicator lights and the recorder or player enters jog/
shuttle mode.
Press any tape transport button to return to the normal
operating mode.
7 JOG/SHUTTLE button/indicator
8 Search dials