AM.PM INSPIRE F5000000 Montageanleitung Seite 2

F5000000
F5004000
F5010000
2
F5002100 / F5802100
F5083100
F5020000
MIXER INSTALLATION INSTRUCTIONS
MIXER FOR WASHBASIN, BIDET, KITCH-
EN (HORIZONTAL SURFACE MOUNT)
213,5
265
F5000000
115
164
F5002100 / F5802100 / F5004000
115
146
F5083100
Operating pressure range in the water
supply is 1.5 – 6.0 atm (120-600kPa).
Pressure difference for hot and cold water
can vary + / - 10%. The recommended
pressure is 2.5 atm. If pressure parameters
in the water supply differ from the speciied
value, input pressure boosting systems or
input pressure reducing valve is required.
To avoid ingress of foreign solids (abrasive
particles) in the mixer, it is recommended to
apply 100-300 micron ilters.
1. Close off hot and cold water supply.
2. Remove (unscrew) the aerator (to avoid
clogging the aerator at the irst start-up of
water).
3. Connect the lexible hoses to the mixer.
The lexible hoses should be screwed into
the mixer slot only by hand without using
tools or applying excessive force, because
this can cause damage the hoses or the
mixer.
3