aldes C. Power Bedienungsanleitung Seite 14

The central unit does not stop
1. Stop the central
unit by pressing the
OFF button
YES
2. - Disconnect the central unit from the
network
- Start the central unit by pressing the
ON button
- Block the vacuum inlet manually
(as in the diagram opposite)
The central
unit stops
Localised leaks in the ductwork
or on the accessories
3. - Connect the hose to the central
unit, which is disconnected from
the network
- Use the STOP button on the
handle to stop the central unit
The central
unit stops
OPERATING INCIDENTS
NO
- Have you had a thunderstorm recently?
- Electrically disconnect then reconnect your
central unit, then try again
- If the problem persists, contact your Aldes
After-Sales Service
The central unit does
not stop
There are leaks in the central unit
- Check that the central unit's cover is correctly
closed
- Check that the tank is positioned correctly
- If the problem persists, contact the Aldes
After-Sales Service
The central
unit does not stop
14
There are leaks in the accessories
- Check that the handle functions correctly
- Check that the hose has not been pierced