aldes C. Power Bedienungsanleitung Seite 13

The central unit stops all by itself
The central unit stops by itself without the user's desire to do so.
- Ensure that all the vacuum inlets and the skirting board dust pan are closed, then carry out
a duct network test by pressing the "Test" button on the central unit:
• Green indicator light = vacuum cleaning network OK
• Red indicator light = leak => Check the network, then re-run a test
- Start the centralised vacuum
cleaning unit.
The central unit stops
- Disconnect the central unit
from the network
- Start the central unit
The central unit
does not stop
There are blockages in the ductwork or in
the accessories
- Check that the handle and the hose are not
blocked off
- Check that the ductwork is not blocked off
(carry out tests by connecting up to several
different network vacuum inlets)
OPERATING INCIDENTS
The central unit stops
13
The central unit operates correctly.
Incident inside the central unit
- Check that the filter bag
is not full
- Check the electrical
connections
- Check that there is no 'plug'
or blockage in the central unit