Service Centre; Cleaning And Maintenance - Max 71953 Gebrauchsanweisung

Apply the disc to the workpiece. Maximum
eff ect is achieved when the disc is held at an
angle of 30-40° in relation to the workpiece.
When cutting, keep the angle grinder
perpendicular to the workpiece.
Move the angle grinder gently along the
workpiece. Give the angle grinder time to
work. It is rarely necessary to press the disc
against the surface to be worked.
Turn the angle grinder off by releasing the
on/off button once you have � nished.

Cleaning and Maintenance

Clean the angle grinder with a slightly damp
cloth after use and always keep its surfaces
and vent holes clean.
Never use corrosive or abrasive detergents,
as they may attack the plastic parts of the
machine.

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• Open weekdays from 8.00 to 16.00
(Fridays until 15.30)
• E-mail: service@hpschou.com
GB
27