Appendix : Installation Control Datasheet - Auerhaan HRglobal TAC5 Installations- Und Wartungsanleitung

Appendix: Installation control datasheet (to be filled in after starting the installation)
Installed by:
Installer's name: ___________________________________________
Company name:_________________________________________
Address:__________________________________________
Telephone: ________________________________________
Installation date: ___/___/___
CONFIGURATION PARAMETERS:
1 HRglobal model
2 Working mode
3 If CA mode:
4 If TQ mode:
5 If LS mode:
6 If CPs mode:
7 % EXH/SUP
8 Pressure alarm (modes CA / LS only)
9 If KWin option :
10 If KWout option
11 If NV option :
Indicate here all changes made in the advanced setup, if any:
VALUES READ OFF DISPLAY WHEN HRg in OPERATION:
1 Supply Airflow (or torque) 1
2 Supply pressure 1
3 Supply airflow (or torque) 2 (HRg 4000/5000/6000 only)
4 Supply pressure 2 (HRg 4000/5000/6000 only)
5 Exhaust airflow (or torque) 1
6 Exhaust pressure 1
7 Exhaust airflow (or torque) 2 (HRg 4000/5000/6000 only)
8 Exhaust pressure 2 (HRg 4000/5000/6000 only)
CA LS CPs TQ Other
m³h K1 =
m³h K2 =
m³h K3 =
%TQ K1 =
%TQ K2 =
%TQ K3 =
Vmin =
Vmax =
m³h (or %TQ) ≡Vmin =
m³h (or %TQ) ≡Vmax =
% on K3 =
Assignment Pa=
% on K3 =
%
Activated? yes / no
If yes:
Automatic / Manual setup
Initialisation:
Supply:
Exhaust:
T° KWin =
T° KWout =
T° NV =
38
V (or Pa)
m³h
Pa
m³h
Pa
°C
°C
°C
m³/h (or %TQ)
Pa
m³/h (or %TQ)
Pa
m³/h (or %TQ)
Pa
m³/h (or %TQ)
Pa