Whispbar K333W Montageanleitung Seite 6

EN
Fitting Kit
K333W
Fit rubber pads (supplied with fitting kit) to
foot. Pad may vary in shape to that shown.
Make sure the pad fits into the holes
underneath the foot.
Repeat for all legs.
Fitment
Slide metal T-nuts into tracks on vehicle.
Two per track.
Screw down the grubscrews into T-nuts
until it hits the track below (this will hold the
T-nuts in position).
Do not over tighten.
Place U-lock over grubscrew and T-nut.
Press down firmly.
6