Drying Hair - Carmen DC1085 ION PRO Gebrauchsanweisung

8 • ENGLISH
> Manual
FIG. 1 – 5 (See picture page 3)
Preparing the hair
• Wash your hair and dry it well.
• Comb your hair thoroughly. Do not use hairspray or other
flammable chemical hair care products.

Drying hair

Your appliance may also be used without attachments as a
normal hair dryer.
• For this, press the key "push" and turn the top until the
stop. Pull the attachment from the appliance (see figs.
1/2).To re-insert the round brush proceed in reversed
sequence (see fig. 3). Turn the top until the stop and
ensure that the markings are aligned.
Round brushing
WARNING!
Danger of burns from hot appliance components!
Never grasp at the round brush, especially not at the tip,
when the appliance is on.
Brush f 30 mm ø or g 38 mm ø must be fitted for round brushing.
• Place the hair strands over the brush and thoroughly brush
from the roots to the tips before rolling. Then beginning
with the hair tips roll until a curl is formed. Turn the
appliance on (position „ " or„ ") and allow the warm air
to take effect until the hair is dry (see fig. 4). For fixation,
press the function switch a "COOL" and let the cold air
take effect. Now press the button for automatic curl
release and pull the round brush out from the curl (see fig.
5). Switch the appliance off.
Note!
Please pay attention that the hair strands are not too thick.
2-step sliding switch
With the 2-step sliding switch b you can switch the
appliance on and select the desired position.