Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
The battery pack is designed for supplying power to the Panasonic
computer series. The battery pack is not charged when it is first
purchased. Be sure to charge it before using it for the first time.
● Before using the battery pack, read this Operating Instruc-
tions and the relevant portions of the computer's Operating
Instructions and Reference Manual carefully.
Precautions
● Be Absolutely Sure to Use the Battery Pack With the
Specified Product
If it is used with a product other than the one for which it was
designed, electrolyte leakage, generation of heat, ignition or
rupture may result.
● Do Not Charge the Battery Using Methods Other Than
Those Specified
If the battery pack is not charged using one of the specified
*1
methods
, electrolyte leakage, generation of heat, ignition
or rupture may result.
*1 Refer to the operating instructions of your product.
● Do Not Throw the Battery Pack Into a Fire or Expose It
to Excessive Heat
Generation of heat, ignition or rupture may result.
● Avoid Extreme Heat (Near the Fire, In Direct Sunlight,
for Example)
Electrolyte leakage, generation of heat, ignition or rupture
may result.
● Do Not Insert Sharp Objects Into the Battery Pack, Dis-
assemble, or Modify It
Electrolyte leakage, generation of heat, ignition or rupture
may result.
● Do Not Apply Shocks to the Product by Dropping It, Ap-
plying Strong Pressure to It, etc.
Electrolyte leakage, generation of heat, ignition or rupture of
the battery may result.
• If this product is subjected to a strong impact, stop using it
immediately.
● Do Not Short the Positive (+) and Negative (-) Contacts
Generation of heat, ignition or rupture may result.
• Do not place the battery pack together with articles such
as necklaces or hairpins when carrying or storing.
● When the Battery Pack Has Deteriorated, Replace It
with a New One
Continued use of a damaged battery pack may result in heat
generation, ignition or battery rupture.
● Do not touch the terminals on the battery pack and the com-
puter. The battery pack may no longer function properly if
the contacts are dirty or damaged.
● Do not expose the battery pack to water, or allow it to be-
come wet.
● Should the battery leak and the fluid get into your eyes, do not
rub your eyes. Immediately flush your eyes with clear water
and see a doctor for medical treatment as soon as possible.
● Store the battery pack in a place with a temperature of be-
tween 10°C to 30°C {50 °F to 86 °F}.
● When the battery pack is left installed in a computer, it dis-
charges electricity gradually in small amounts even if the
computer's power is off. If left for a long period (several
months or more), the battery pack will over discharge and its
performance may deteriorate.
If the battery pack will not be used for a long period of time (a
month or more), charge or discharge (use) the battery pack
until the remaining battery level becomes 30% to 40% and
store it in a cool, dry place.
● Keep the battery bay weight saver in a safe place after removal.
Putting a heavy thing on it or dropping it may cause damage.
● Read the computer's Reference Manual or the Operating
Instructions before use. For how to start up the Reference
Manual, please refer to the computer's Operating Instructions.
CAUTION:
Risk of Explosion if Battery is replaced by an Incorrect Type. Dis-
pose of Used Batteries According to the Instructions.
For use with I.T.E. Listed Notebook Computer, Panasonic,
Model CF-C2.
(The statement based on UL standards.)
DFQW5687ZAT_CF-VZSU80U_OI_MGFJ.indb
4
How to Replace and Charge the Battery Pack
The battery pack is not charged when it is first purchased. Be
sure to charge it before using for the first time. Refer to the
computer's Reference Manual or the Operating Instructions.
<Remove the battery pack>
Slide the latch of the battery pack(A) to be removed to
the unlocked position (
A
CAUTION
● In the case of a hot swap, finish replacing the battery within
a minute.
Depending on the built-in bridge battery status, the com-
puter may enter hibernation within one minute. Replace the
battery pack as soon as possible.
● During battery replacement, the LCD backlight may become
dark.
<Insert the battery pack>
Slide the battery pack in parallel with the arrow direction
until it click to the secured position.
1
<Charge the battery pack>
Connect the AC Adaptor to the computer.
The battery charging starts automatically.
● Charging time and operating time vary according to the state
of the computer's power supply and the temperature.
● The battery pack may become warm during charging or nor-
mal use. This is completely normal.
Specifications
CF-VZSU80U
Type
Li-ion
Voltage
10.8 V
Capacity
6800 mAh (typ.)
/ 6400 mAh
(min.)
Dimensions
Approx. 193 mm × 71 mm × 21.5 mm
(W x D x H)
{Approx. 7.6" × 2.8" × 0.85"}
Weight
Approx. 345 g
{Approx. 0.76
lb.}
Refer to the Operating Instructions about the charging time/operating time.
Declaration of Conformity (DoC)
"Hereby, Panasonic declares that this Battery Pack
is in compliance with the essential requirements and
other relevant provisions of EU Council Directives."
Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
58-E-1
Winsbergring 15, 22525 Hamburg, Germany
52-M-1
), and pull out the battery pack.
Confirm that the battery indica-
tor (B):
Lights green; this means that
the built-in bridge battery has
enough remaining power re-
quired for a hot swap.
Blinks red; You cannot replace
the battery pack without turning
off the computer.
When the battery indicator
B
(B) doesn't light; Shutdown,
Hibernation and while the AC
adaptor is connected to the
computer.
CF-VZSU82U
CF-VZSU83U
3400 mAh (typ.)
9300 mAh (typ.)
/ 3200 mAh
/ 8700 mAh
(min.)
(min.)
Approx. 210 g
Approx. 475 g
{Approx. 0.46
{Approx. 1.05
lb.}
lb.}
18-E-0
2012/12/05
16:50:17
Werbung
