Preparation For Operation - VERTO 52G418 Betriebsanleitung

GB
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
HIGH PRESSURE CLEANER
52G418
CAUTION: BEFORE USING THE TOOL READ THIS MANUAL CAREFULLY
AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
• Before connecting the cleaner to a power network ensure the
supply voltage matches the voltage on the rating plate of the tool.
• Connect the cleaner only to electrical system equipped with
residual current circuit breaker that will cut the power off when
earth leakage current exceeds 30 mA in less than 30 ms.
• Connect the cleaner only with appropriate power cord, designed
for outdoor use.
• WARNING. High pressure cleaner is designed for use with cleaning
agent recommended by the manufacturer. Use of other cleaning
agents may have negative impact on safe operation of the tool.
Do not use acids, petrol, kerosene or other flammable liquids as
cleaning agents. Use domestic-purposes detergents only (pH 6-8).
• WARNING. Do not use the tool close to other persons unless they
wear protective clothes.
• WARNING. High pressure stream may be dangerous when used
inappropriately. Do not direct the stream onto people, electric
equipment and the cleaner itself.
• Do not direct the stream at yourself or other persons to clean
clothes or shoes.
• Disconnect the high pressure cleaner from power supply when
performing maintenance tasks.
• High pressure cleaner should not be used by children or untrained
personnel.
• To ensure safe operation use only spare parts that are original or
approved by the manufacturer.
• WARNING. Use high pressure hoses, connectors and equipment
recommended by the manufacturer. Those parts affect safety of
user of the device.
• Do not use the high pressure cleaner when the power cord is
damaged, or any other important part of the tool equipment e.g.
safety parts, high pressure hoses, spray gun.
• When extension cord is used, socket and plug should be
splashproof.
• WARNING. Improper power cord extension may cause electric
shock.
• When the overpressure safety switch does not actuate, do not allow
the cleaner to work for more than two minutes with the gun closed.
After this time the temperature of water in the circulation system
increases and it may damage pump seals.
• The cleaner is intended for indoor and outdoor use.
CAUTION! The design is assumed to be safe, protection measures
and additional safety systems are used, nevertheless there is
always a small risk of operational injuries.
EXPLANATION OF USED SYMBOLS
1. Caution, use precaution measures
2. Read instruction manual, observe warnings and safety conditions
therein!
3. Use personal protection measures (protective goggles)
4. Disconnect the power cord before starting maintenance or
operation.
5. Use protective clothes.
6. Protect against humidity.
7. Do not allow other persons to stay in the operation range
8. Protection class 2
9. Do not put your extremities close – liquid under high pressure!
10. Keep children away
CONSTRUCTION AND USE
High pressure cleaner is a 2 protection class device designed for
cleaning surfaces with high pressure water stream. High pressure
cleaner is widely used in households, transport, building industry,
agriculture and other fields. It is especially useful for cleaning cars,
trailers, buildings, ceramic tiles etc.
Use the device according to its purpose only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
1. Transport handle
2. Water outlet connector
3. Water inlet connector
4. Wheel
5. Switch
6. Additional handle
7. Lock button
8. Additional handle
9. Power cord hook
a. Lance
b. Gun handle
c. Pressure hose
d. Trigger lock lever
e. Trigger
f. Nozzle
g. Water inlet connector
h. Detergent container
i. Spraying tip
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Lance (2 pieces)
2. Detergent container with spraying tip
3. Water inlet connector
4. Additional handle
5. Gun handle with pressure hose
6. Screws
7. Additional handle

PREPARATION FOR OPERATION

INSTALLATION OF ADDITIONAL HANDLE
0
You can transport the cleaner to a workplace by carrying or rolling on
its wheels using fixed or additional handle.
• Place the additional handle (6) at rear part of the device casing
(slide the handle fully into the socket).
• Secure it with the locking screw (fig. I).
10
- 1 pce
- 1 pce
- 1 pce
- 1 pce
- 1 pce
- 1 set
- 1 pce