Beper 90.348A Betriebsanleitung Seite 11

Hand Mixer Use instructions
Do not use the TURBO button for more than 1 minute.
Be careful with the moving parts, especially when the appliance is plugged.
Keep your hands, hair, clothes and utensils away from the whisks when they are moving
to prevent from injuries to people and damages to the hand mixer.
Keep away from children.
Do not immerse the hand mixer into water or other liquids.
Do not use the hand mixer with wet hands or naked feet.
Before inserting the beaters and/or clean the hand mixer unplug the cord supply from the socket.
Before removing ingredients, unplug the cord supply from the socket.
DESCRIPTION
1 – Eject handle
2 – Speed selector
3 – Ergonomic handle
4 – Motor unit
5 – Whisks
USE INSTRUCTION
Make sure the cord supply is not plugged and the speed selector (2) is on position 0.
Insert the whisks (5) until they are locked into place.
Plug the cord supply into the socket.
Pour the ingredients into the container and start with the hand mixer, putting it at the centre of the
container.
Press on/off to turn on the hand mixer.
Select different speed with the selector (2) and always start with the lower speed 1.
When starting the preparation, make sure to the correct position of the hand mixer into the container,
that could cause splashes. When complete, turn off the hand mixer by pressing on/off (2), and put it
on his back to remove the whisks (5) easily by pressing removing whisks button (1).
It is recommended to use the hand mixer for around 30 second at low speed – 1 – to arrive at max.
speed – 2 –.
CLEANING
Before cleaning the hand mixer unplug the cord supply from the socket and make sure the switch
on/off (2) is turned off.
Remove the whisks by pressing la removing whisks button (1).
Wash the whisks with hot water and soap.
The motor unit may be cleaned with a soft cloth and hot water.
Do never clean with thinners, abrasive detergent, detergent for plastic, glass or other that could
damage the hand mixer.
Do not introduce liquids into the hand mixer.
Do not immerse the motor unit (4) into water or other liquids, do not rinse with water.
11