General Safety Instructions; Symbols Used In This Manual; Importance Of This Manual; Envisaged Use - Erreka CICLON series Montage- Und Betriebsanleitung

GENERAL SAFETY INSTRUCTIONS

1

SYMBOLS USED IN THIS MANUAL

This manual uses symbols to highlight specific texts. The
functions of each symbol are explained below:

Failure to respect the safety warnings could
lead to accident or injury.

Work sequences or procedures.
2

IMPORTANCE OF THIS MANUAL


Read this manual in its entirety before carrying
out the installation, and obey all instructions.
Failure to do so may result in a defective
installation, leading to accidents and failures.
3

ENVISAGED USE

This device has been designed for installation as part of
an automatic opening and closing system for swing
gates.

This device is not suitable for installation in
inflammable or explosive environments.
4

INSTALLER'S QUALIFICATIONS


The installation should be completed by a
professional installer, complying with the
following requirements:
• He/she must be capable of carrying out
mechanical assemblies in doors and gates,
choosing and implementing attachment
systems in line with the assembly surface
5

AUTOMATIC GATE SAFETY ELEMENTS

This device complies with all current safety regulations.
However, the complete system comprises, apart from
the operator referred to in these instructions, other
elements which should be acquired separately.

The safety of the complete installation depends on
all the elements installed. Install only Erreka
34
Installation manual

Important details which must be respected for
correct assembly and operation.

Additional information to help the installer.
}
Information on care for the environment.

Moreover, this manual
information which will help you to carry out
installation more efficiently.

This manual is an integral part of the product. Keep
for future reference.

Failure to install or use as indicated in this
manual is inappropriate and hazardous, and
could lead to accidents or failures.
(metal, wood, brick, etc) and the weight and
effort of the mechanism.
• He/she must be capable of carrying out
simple electrical installations in line with the
low tension regulations and applicable
standards.

The installation should be carried out bearing
in mind standards EN 13241-1 and EN 12453.
components in order
operation.

Respect the instructions for all the elements
positioned in the installation.

We recommend installing safety elements.

For further details, see "Elements of the complete
installation" on page 35.
provides valuable
to guarantee proper