Beper BP.651H Betriebsanleitung Seite 11

4 in 1 Hand Blender Use instructions
It is forbidden to use the multipurpose immersion blender by children or disabled or disabled persons.
Do not use accessories other than those supplied with the blender.
Installation must be carried out in accordance with the manufacturer's instructions. Improper installation can
cause damage to persons, animals, or property, against which the manufacturer can not be liable.
Do not place blender near or on electric ovens or heat sources.
DESCRIPTION OF THE PRODUCT Fig.1
1.Power cord
2.Rubber ring for hanging
3.Speed button I
4.Speed button II
5.Motor unit
6.Assembly mechanism
7.Blender bar
INSTRUCTIONS FOR USE
ASSEMBLY AND OPERATION OF THE IMMERSION FRAME Fig.2
Insert the blender bar (7) into the motor unit (5) of the blender, fix the parts.
To disassemble the blender bar, unscrew the assembly mechanism (6) and separate the two components.
Check the correct assembly of the immersion blender, insert the power cord (1) into the electrical socket.
Select the speed of rotation using the speed keys:
Speed key I (3) for low speed;
Speed key II (4) for a high speed.
THE WORKING CYCLE MUST NOT EXCEED 30 SECONDS TO AVOID OVERHEATING. THE BREAK
BETWEEN A WORK CYCLE AND THE OTHER MUST BE AT LEAST 5 MINUTES.
The steel blade (8) allows finely grinding the ingredients inside a container.
To obtain a better result, it is suggested to keep the rotary swirling blender inside the ingredient container.
At the same time it is important to keep the steel blade (8) fully immersed in the ingredients to avoid splashing.
DO NOT IMMERSE THE BLENDER BAR(7) BEYOND THE COUPLING OF THE ASSEMBLY MECHANISM
(6); DO NOT ALLOW THE LIQUID TO PENETRATE THE JOINT ITSELF.
If during the operation, normal blade rotation (8) is blocked or obstructed by food, turn off the blender and di-
sconnect the power cord (1) from the electrical socket. Release the blade from the food and resume the work.
The immersion blender is ideal for the preparation of:
Milk, yoghurt, baby food, whipped cream, milkshake, mashed potatoes; sauces, juices, juices; soups, vegeta-
bles, mayonnaise.
Foods can be processed directly in the graduated glass (14) or in a container (not included) high enough to avoid
sketches. Do not fill the glass beyond the limit of 650 ml.
Before working hot foods, let them cool down.
After use, unplug the power cord (1) from the electrical outlet, remove the removable housing (7).
ASSEMBLY AND OPERATION OF THE STEEL FRAME Fig.3
Insert the whisk coupling unit (9) into the motor unit (5) of the blender, fix the parts. Then insert the whisk (10).
To disassemble the attachment, unscrew the assembly mechanism (6) and separate the two components.
Verify the correct assembly of the whisk (10), insert the power cord (1) into the electrical socket.
Select the speed of rotation using the speed keys:
Speed key I (3) for low speed;
Speed key II (4) for a high speed.
THE WORKING CYCLE MUST NOT EXCEED 30 SECONDS TO AVOID OVERHEATING. THE BREAK
BETWEEN A WORK CYCLE AND THE OTHER MUST BE AT LEAST 5 MINUTES.
The whisk (10) allows to mix, punch and mount.
Place the whisk (10) at the center of the container; To achieve a better result, do short machining cycles.
At the same time it is important to keep the whisk (10) completely immersed in the ingredients to avoid splashing.
DO NOT IMMERSE THE WHISK (10) BEYOND THE JOINT OF THE ASSEMBLY MECHANISM (6); DO NOT
ALLOW THE LIQUID TO PENETRATE THE JOINT ITSELF.
8.Steel blade
9.Whisk coupling unit
10.Whisk
11.Chopper coupling unit
12.Chopper blade unit
13.Chopper bowl
14.Graduated beaker 650 ml
11
EN