Lighting Instructions - Napoleon PRO285X Handbuch

9

Lighting Instructions

EN
Burner Control
WARNING!
Open lid
WARNING!
Ensure all burner controls are in the off position. Slowly turn on the cylinder gas
supply valve.
Main Burner Lighting
1. Open grill lid
2. Push and turn any main burner control knob slowly to the 'hi' position. This action
will ignite the selected burner.
3. If the burner does not ignite, then immediately turn the control knob back to the
'off' position and repeat step 2 several times.
4. If the burner will not ignite within 5 seconds, turn the control knob to the 'off'
position and wait 5 minutes for any excess gas to dissipate, either repeat steps 2 and 3
or light with a match.
5. If lighting the unit with a match, clip the match into the supplied lighting rod. Hold
the lit match down through the grill while turning the corresponding burner valve to
high.
N415-0437CE-GB-DE OCT 23.17 www.napoleongrills.com