Network Selection - EADS TGR990 Kurzanleitung

When transmission barring is active in the network mode, the radio
cannot send the necessary information to the network about
changes in talk groups. When transmission barring is active, you
cannot change the selected group. If you make any other changes
that affect talk groups, such as change the selected folder, home
group, or the scanning priority of a group, you will not be able to
receive further communication from the affected groups. After
transmission barring has been deactivated, the radio can attempt to
negotiate the changes with the network.
If you start to make a red key call or an emergency call to an
emergency number programmed into your radio when transmission
barring is active, the radio automatically deactivates transmission
barring and attempts to make the call.
Note: If you start to make a red key call or an emergency call when
transmission barring is active, transmission barring will be
deactivated, and you should consider exiting the area where you
wanted transmission to be barred.
To activate or deactivate transmission barring, press the menu key
and select Setup→Networks→TXI Mode→Activate
MENU
Deactivate. Transmission barring should be active before you enter
the area where you want transmission to be barred. Depending on
predefined radio settings, the radio may send a notification message
to the network about the activation.

Network selection

In addition to your predefined home network, you may be able to
select other networks in which your radio can operate (network
service), for example, if you are not in the coverage area of your
home network. The network can be changed automatically or
manually.
G e n e r a l i n f o r m a t i o n
or
E
N
G
L
I
S
H
D
E
U
T
S
C
H
F
R
A
N
Ç
A
I
S
S
V
E
N
S
K
A
E
S
P
A
Ñ
O
L
N
E
D
E
R
L
A
N
D
S
P
O
L
S
K
I
13