Reset The Filter Lifetime Counter - Philips AC4086 Benutzerhandbuch

8 Reset the filter
lifetime counter
When you replace the filters, it is important
that you also reset the filter lifetime counter
afterwards. This allows the appliance to be in
sync with the filter lifetime.
Note
•
Reset the appliance when it is plugged in and
switched on.
•
Only replace the respective filters when you see
the respective filter lights flash.
•
After replacing the filters, the respective filter
light still flashes or continuous on until you reset
the filter lifetime counter.
After you have replaced the filter, reset the filter
time:
1
Switch off the appliance and unplug it.
2
Replace the filter (see the chapter
'Replacing the filters').
3
Put the plug in the power socket and
switch on the appliance again.
4
Press and hold the RESET button for two
seconds.
EN 31