E.ziclean® Tornado Robot Cleaning Modes; Automatic Cleaning Mode; Spot Cleaning Mode; Edge Cleaning Mode - e.ziclean TORNADO Benutzerhandbuch

8. e.ziclean® TORNADO robot cleaning modes
A. AUTOMATIC CLEANING MODE:
The AUTOMATIC cleaning mode provides optimal cleaning coverage of your rooms for a period of
approximately 120 minutes, depending on the floor type. Once its batteries are spent, the
e.ziclean® TORNADO returns to charge itself on its base.
Press the AUTO CLEAN button on the remote control or
this cleaning mode.
B. SPOT CLEANING MODE:
The SPOT cleaning mode allows the robot vacuum cleaner to concentrate its cleaning action a small
area, and for a period of 3 minutes. This method of cleaning is ideal to clean a particularly dirty area.
Once its task completed, the e.ziclean® TORNADO will stop on the spot. Its return to the charging
base must be performed manually from the DOCK button on the remote control or on the device.
Press the SPOT button on the remote control in order to launch this cleaning mode.
C. EDGE CLEANING MODE:
The EDGE mode corresponds exclusively to cleaning along skirting boards and in corners, for about
25 minutes.
Once its task has been completed, the e.ziclean® TORNADO will stop automatically return to its
charging base.
Press the EDGE button on the remote control in order to launch this cleaning mode.
D. ZIG-ZAG CLEANING MODE:
In ZIG-ZAG mode, the robot travels over wide straight lines to increase its field of action. Therefore,
this mode provides effective coverage to clean large rooms with little furniture.
After a complete cycle of approximately 120 minutes, the e.ziclean® TORNADO will automatically
return to its base to recharge.
Press the ZIGZAG button on the remote control in order to launch this cleaning mode.
E. QUICK CLEANING MODE:
By default and for all cleaning modes, the e.ziclean® TORNADO`s navigation speed is normal. It can
be accelerated manually.
Press on the SPEED button on the remote control in order to enable or disable this option.
F. UV LAMP:
UV lamp offers an antibacterial and allergen sterilization action on floors.
Press the UV button on the remote control in order to enable or disable this option.
on the robot in order to launch
.EN.