Programing The Cleaning Days And Times - e.ziclean TORNADO Benutzerhandbuch

B. PROGRAMING THE CLEANING DAYS AND TIMES
The e.ziclean® TORNADO robot vacuum cleaner can program an automatic cleaning launch for each
day of the week.
. Selecting the day.

Remove the robot from its base.
 Turn the robot vacuum cleaner on using the device's On/Off button.
Press the button
button . Once the desired DAY is highlighted, validate your choice by pressing the
button 2 times.
. Selecting the hours and minutes.
To adjust the time, press the button

until the 1st number of the display
Now, adjust the hours and the minutes by scrolling through the numbers from 0 to 9 from the

button , and validate your selection with
Continue selecting the hours and the minutes in the same manner. When the Mon. is

highlighted, confirm the setting of the hours and minutes by pressing the
AUTOMATIC CLEANING button
Repeat steps 1 through 6 of the programing step to select other days and hours of programing
during the week.
The e.ziclean® TORNADO will leave its base on the day and at the time programed, only if it is fully
charged.
. Make your selection by scrolling through the days using the
twice.
on the screen. Press this button once again
is highlighted.
.
.EN.
Please note