Operator Safety - Briggs & Stratton srd310 Bedienungsanleitung

Operator Safety

Important Safety Instructions
SAVE THESE INSTRUCTIONS - This manual contains
important instructions that should be followed during the
initial set-up, the operation, and the maintenance of the
equipment. Save these original instructions for future
reference.
Safety Symbols and Meanings
FIRE
STOP TOXIC FUMES
EXPLOSION
HAZARDOUS
CHEMICAL
READ FAST
MANUAL
FUEL
SHUT-OFF
ROLL-OVER HAZARD
MOVING SHOCK
PARTS
KICKBACK
ON OFF WEAR EYE
PROTECTION
HOT CHOKE
SURFACE
SLOW OIL
FUEL AMPUTATION
HAZARD
The safety alert symbol is used to identify safety
information about hazards that can result in personal injury.
A signal word (DANGER, WARNING, or CAUTION) is used
with the alert symbol to indicate the likelihood and the
potential severity of injury. In addition, a hazard symbol may
be used to represent the type of hazard.
DANGER indicates a hazard which, if not
avoided, will result in death or serious injury.
WARNING indicates a hazard which, if not
avoided, could result in death or serious injury.
CAUTION indicates a hazard which, if not
avoided, could result in minor or moderate injury.
NOTICE indicates a situation that could result in
damage to the product.
WARNING
Running engine gives off carbon monoxide, an odorless,
colorless, poison gas.
Breathing carbon monoxide can cause headache, fatigue,
dizziness, vomiting, confusion, seizures, nausea, fainting
or death.
• Operate equipment ONLY outdoors.
• Keep exhaust gas from entering a confined area
through windows, doors, ventilation intakes, or other
openings.
9