G21 VitalStick pro Bedienungsanleitung Seite 5

How to use the dicer attachment
Use the dicer attachment for cutting fruit and boiled vegetables.
Attention! Do not process hard and frozen food. It can damage the dicer attachment.
Warning:
Before assembling make sure that the power plug is not inserted into the socket.
• Put the dicer mesh into the clamps and fix it.
• Set the clamps inside the processing bowl.
• Put the Dicer attachment knife on the clamps.
• Put the geared lid on the bowl.
• Turn the geared lid clockwise to the position and check the fixation of the geared lid.
• Put the motor unit on the geared lid.
• Insert the plug into the socket.
• Set the required speed 1-5 using the control.
• To switch the blender on press and hold the button.
• When the button is pressed, the knife rotates at maximal rotation speed.
• Place the products into the lid chute, use the pusher for products feeding. Press the pusher
gently for products feeding.
• After you finish using the unit, take the plug out of the socket, disconnect the motor unit from
the geared lid by press release button of the motor unit.
• Then remove the geared lid from the bowl by pressing the button and turning the lid anticlockwise.
• Carefully remove the dicer attachment knife.
• Carefully remove clamps.
• Take the chopped products out of the processing bowl.
• Clear, wash and dry all the used parts immediately after the end of operation.
The English version of the manual is an exact translation of the original manufacturer's instructions.
Images used in this manual are for illustrational purposes only and may differ from the actual product.