Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Thank you for purchasing our product.
Before using this unit, please read this manual in order to avoid improper handling and use
of the device.
How to use the discs (shredding/slicing)
• Set the driving shaft on the axis of the bowl.
• Set the required disc on the driving shaft.
• Put the geared lid on the bowl.
• Turn the geared lid clockwise to the position and check the fixation of the geared lid.
• Put the motor unit on the geared lid.
• Insert the plug into the socket.
• Set the required speed 1-5 using the control.
• To switch the blender on press and hold the button.
• When the button is pressed, the disc rotates at maximal rotation speed.
• Place the products into the lid chute, use the pusher for products feeding. Press the pusher
gently for products feeding.
• After you finish using the unit, take the plug out of the socket, disconnect the motor unit from
the geared lid by press release button of the motor unit.
• Then remove the geared lid from the bowl by pressing the button and turning the lid anticloc-
kwise.
• Carefully remove the disc.
• Take the chopped products out of the processing bowl.
• Clear, wash and dry all the used parts immediately after the end of operation.
Werbung
