Gemini CD-1800X Bedienungshandbuch Seite 2

1
POWER: Press the POWER (1) button to turn on the CD player.
NOTE: MAKE SURE VOLTAGE SELECTOR SWITCH (36) IS SET BEFORE USE.
2
DISC IN/OUT SLOT: This CD player is a front-loading player; 12 cm or 8 cm sized CD's can be used in the DISC IN/OUT SLOT (2).
NOTE: DO NOT FORCE A DISC INTO THE SLOT WHEN THE POWER TO THE UNIT IS OFF.
3
DISC IN/OUT LED: The DISC IN/OUT LED (3) blinks for disc insertion and remains solid while a disc is in the player.
4
DISPLAY: The DISPLAY (4) shows the various functions for the CD player. See FUNCTION DESCRIPTIONS for details.
5
PLAYBACK DISPLAY BAR: The PLAYBACK DISPLAY BAR (5) shows the TIME ELAPSED and TIME REMAINING .
6
PLAY/PAUSE: Press PLAY/PAUSE (6) button to activate PLAY or PAUSE mode. See CUE or ROBO START INSTRUCTIONS for details.
7
TRACK SKIP: Pressing TRACK SKIP (7) buttons select which track to play.
8
SEARCH DIAL: Use the SEARCH DIAL (8) to scan forward and reverse directions on a TRACK .
9
DIRECT ACCESS: Use the DIRECT ACCESS (9) keys to select exactly which track to play or to set a precise CUE POINT.
10
JOG WHEEL: The JOG WHEEL (10) has various functions: SCRATCH mode, PITCH BEND, CUEING, and EFFECTS.
11
STOP/EJECT: Press STOP/EJECT (11) once to stop, twice to eject, and hold down to eject the CD.
12
TIME: Tap the TIME (12) button to switch the time preference in three modes: TOTAL TIME REMAINING , TIME REMAINING , TIME ELAPSED.
(13-15) SEAMLESS LOOP BUTTONS:
13
FLY CUE1: FLY CUE1 (13) sets a CUE POINT on the fly.
14
CUE 1-B/EXIT: After a CUE POINT is set press the CUE 1-B/EXIT (14) button in PLAY mode, for a SEAMLESS LOOP, press again to exit.
15
RETURN: To play from a saved CUE POINT or a SEAMLESS LOOP, press RETURN (15) to play the LOOP or the CUE again.
16
CUE 1/PREVIEW: Tap CUE 1/PREVIEW (16) to come back to a set CUE or press and hold to PREVIEW from a CUE, refer to CUE INSTRUCTIONS.
17
HOT START CUE1: Press HOT START CUE1 (17) to instantly return to and play from a CUE POINT.
18
AUTO CUE SINGLE/CONTINUOUS: Tap AUTO CUE SINGLE/CONTINUOUS (18) for: AUTO CUE SINGLE , CONTINUOUS , and NORMAL modes.
19
SET CUE: Use SET CUE (19) as a trigger for HOT STARTS 2-4 (20) or CUE 1/PREVIEW (16) . S ee OTHER CUE OPTIONS for details.
20
HOT STARTS (CUE2, CUE3, CUE4): HOT STARTS CUE 2-4 (20) allows you to set up to 3 different CUE POINTS using SET CUE (19).
21
ROBO START: Using ROBO START (21) lets you alternate play between 2 Gemini CD-1800X CD Players.
22
MASTER TEMPO: MASTER TEMPO (22) locks in the music's PITCH even with no change in vocal or instrument tone.
23
PITCH: The PITCH (23) button activates the PITCH CONTROL SLIDE (25) indicated by the red LED light above the button.
24
VPS (VARIABLE PITCH SELECTOR) 4%, 8% and 16%: VPS (24) use to change the pitch settings from 4%, 8%, and 16%.
25
PITCH CONTROL SLIDE: The PITCH or BPM of a track will change (+ or -) 4%, 8%, and 16% when the PITCH CONTROL SLIDE (25) is moved.
26
BPM/PITCH (PITCH BEND - or +): Pressing BPM/PITCH (26) buttons together switches from BPM or PITCH BEND mode . When in BPM or
PITCH mode, the buttons for BPM/PITCH (26) will raise or lower the pitch percentage or BPM - or + 4%.
27
ZOOM: Pressing the ZOOM (27) effect button changes the delay time, producing a flanger effect, by rotating the jog wheel.
28
FILTER: Pressing the FILTER (28) effect button changes the cutoff frequency of the playback sound when the jog wheel is rotated.
29
REVERSE: Tap the REVERSE (29) button to play your musical selection backwards.
30
THE BRAKE: Pressing PLAY or PAUSE with BRAKE (30) on, makes the CD sound just like a RECORD stopping.
31
HOLD: Press HOLD (31) after you press ZOOM (27) or FILTER (28) to keep the parameters held for the effect chosen.
32
SCRATCH: Press the SCRATCH (32) button to make the cd "SCRATCH" like a RECORD.
33
DIGITAL OUTPUT JACK (BNC): Use the BNC (33) to connect to any type of device that accepts digital signals.
34
LINE OUTPUT JACKS: LINE OUTPUT JACKS (34) provide stereo sound via RCA cables to your mixer or receiver.
NOTE: MAKE SURE CABLES ARE PLUGGED IN TIGHT FOR OPTIMAL SOUND.
35
ROBO START JACK: ROBO START JACK (35) is used to connect two CD player's to use the ROBO START (21) feature.
NOTE: MAKE SURE ROBO START CABLE IS PLUGGED IN TIGHT FOR ROBO START (21).
36
VOLTAGE SELECTOR SWITCH: To set the proper voltage, adjust the VOLTAGE SELECTOR SWITCH (36) to 115 or 230 volts.
37
POWER JACK (AC IN): Connect the power plug into the POWER JACK (37) for power.
QUICK START GUIDE:
( )
2
(8 cm discs may have a loading problem.)