Charge The Player; Buttons And Controls - AGPtek K2 Bedienungsanleitung

Charge the Player

1. Use 5V/500mA Charger
Plug one end of the micro USB cable into the USB port of a charger, the other end to the
port on your device. After fully charged, disconnect the cable from your device by pulling it
straight outward.
2. Charge by Computer
Connect the device to a running computer via included USB cable.
Note: To prevent battery deterioration, you are supposed to charge the battery at least
once every half a year or every year.

Buttons and Controls

Quick Guide
1. Power On/Off
Long press the power button for 3 seconds to turn on/off the player.
Short press the power button to turn on/off the screen display.
1. Menu
2. Back
3. Move up/Vol +
4. Move down/Vol -
5. Move left/Previous/Fast rewind
6. Move right/Next/Fast forward
7. Enter/Play/Pause
8. Headphone jack
9. Micro USB port
10. Lanyard hole
11. Speaker
12. TF card slot
13. MIC/Reset
1