Installation Instructions - De Dietrich DHT6605X Betriebsanleitung

1 / INSTALLATION INSTRUCTIONS

It is necessary to provide a bipolar cut-off device in the power supply circuit, where
‡
the opening of the contacts is more than 3 mm.
The plug must be accessible after installation.
‡
If the supply lead is damaged, it must be replaced by an equivalent lead (H05RNF
‡
3x1mm²) available from the after-sales department.
A 16-ampere fuse is necessary
‡
Your fryer uses 2,200 watts. It is therefore necessary that your supply can provide
‡
this power without danger. IT IS VITAL that your fryer be connected to earth.
IT IS ABSOLUTELY IMPERATIVE TO LEAVE A SPACE OF AT LEAST 5 CM
BETWEEN THE BOTTOM OF THE FRYER AND THE FIRST SHELF OF THE
KITCHEN UNIT
WARNING : If the fryer malfunctions in any way, unplug the appliance or
remove the fuse corresponding to the sector where the fryer is hooked up.
16