Compass 214 070 Bedienungsanleitung Seite 27

6. ConFiguRation oF tHe led
pC RgB
screen Menu
Press MENU button to display the main menu.
Press ▼ / ▲ button to select Screen in the main menu, it will highlight the first option.
(Only available when inputting PC-RGB signal)
auto adjust
Press ▼ / ▲ button to select Auto Adjust, then press OK button to start adjusting
automatically.
Horizontal pos.
Press ▼ / ▲ button to select Horizontal Pos., then press OK button to enter sub-menu.
Press ◄ / ► button to adjust.
Vertical pos.
Press ▼ / ▲ button to select Vertical Pos., then press OK button to enter sub-menu.
Press ◄ / ► button to adjust.
size
Press ▼ / ▲ button to select Size., then press OK button to enter sub-menu.
Press ◄ / ► button to adjust display size.
phase
Press ▼ / ▲ button to select Phase, then press OK button to enter sub-menu.
Press ◄ / ► button to adjust.
50
Bedienungsanleitung_214070_110_Multi.indd 50-51
1. Press ▼ / ▲ button to select the
option that you want to adjust in the
CHANNEL menu.
2. Press OK button to adjust.
3. After finishing your adjustment, Press
MENU button to save and return back
to the previous menu.
6. ConFiguRation oF tHe led
notes:
1. noise Reduction in PICTURE option is valid.
2. SOUND menu and description are the same as that for DTV mode.
3. LOCK menu and description are the same as that for DTV mode.
4. TIME menu has no clock option.
5. Hearing impaired and pVR File system in OPTION menu are invalid.
aV / HdMi / CoMponent
Hinweise:
1. PICTURE menu and description are the same as that for DTV mode.
2. SOUND menu and description are the same as that for DTV mode.
3. LOCK menu and description are the same as that for DTV mode..
4. aV/HdMi/Component mode has no CHANNEL menu.
5. TIME menu has no clock option.
6. Hearing impaired and PVR File System in OPTION menu are invalid.
dMp
dMp operation
note:
Before operating DMP menu, Plug in USB device, then press INPUT button to set the
Input Source to DMP.
Press ◄ / ► button to select DMP in the Source menu, then press OK button to enter.
Press ◄ / ► button to select the option you want to adjust in the main DMP menu,
then press OK button to enter.
51
24.01.13 10:45