Permanent Mounting - TomTom WORK LINK Installationsanleitung

EN

Permanent mounting

Per Using the holder and tapping screws
man
ent
mou
ntin
g
To permanently mount the TomTom LINK in a
vehicle use the three self-tapping screws to
mount the holder. Follow the safety
instructions in this document.
1. Choose a flat surface for accurate
positioning stand of the TomTom LINK.
2. Insert the three screws into the
corresponding holes in the holder.
3. Tighten the screws.
4. Insert the TomTom LINK in the holder until
it fully engages.
Important
Make sure you do not damage the TomTom LINK.
Follow the safety instructions in this document.
20