Package Contents/Parts List; Technical Data; Intended Use; Safety Information - lidl 302585 Gebrauchsanleitung

Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following instructions
for use.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.
Please contact our service department if you
have any questions regarding our product or if
you have difficulties reading these instructions.
Package contents/
parts list (Fig. A)
1 x toilet seat riser (1)
1 x handle left (2L)
1 x handle right (2R)
1 x long bracket left (3L)
1 x long bracket right (3R)
1 x short bracket left (4L)
1 x short bracket right (4R)
3 x retaining strips (5)
3 x clamping brackets (6)
8 x screws (7)
2 x screws (8)
2 x threaded sleeves (9)
1 x instructions for use

Technical data

Max. user weight: 150kg
Toilet seat riser with handles and lid:
approx. 52 x 44 x 33.5cm (W x H x D)
Net weight: approx. 3.4kg
Date of manufacture (month/year):
06/2018

Intended use

This item has been designed solely as a seat
riser for a toilet. The item is not suitable for use
by people with impaired mental abilities.
It is intended for use in a private toilet and by
one person only, up to a maximum of 150kg.
14 GB/MT
This item is not a medical device and was not
developed for the rehabilitation and medical
care of individuals.

Safety information

Risk of injury!
WARNING!
• Suffocation risk for children! Do not allow
children to play with the item or the packag-
ing materials unsupervised.
• Keep children away from the item. They could
try to stand on it or pull themselves up on it
and fall off in the process.
• Use the item for its intended purpose only.
• The item may only be used by persons who
are familiar with the safety instructions.
• The item may not be loaded by more than
150kg.
• Check the item for damage or wear before
each use. Check that all screws are tight
before each use! The item should only be
used if it is in perfect condition! Do not use the
item if it is visibly damaged or you suspect it is
damaged!
• Do not lift with a person on it.
• Do not step on the seat.
• Risk of toppling over! Sit in the middle of the
seat only. Do not stand on the item.
Beware of damaging the item!
• Examine the item regularly to check that the
screws and all connections are fitting tightly
and correctly and retighten if necessary.
• No liability will be accepted for damages to
the toilet of any kind.
• Do not use caustic or abrasive detergents.

Assembly

You will need a Phillips screwdriver to assemble
the riser.
1. Remove the lid and seat from your toilet bowl.
2. Slide the brackets (3L) (3R) over the ends of
the handles (2L) (2R) (Fig. B).