Timer Mode - Auriol HG00151 Bedienungs- Und Sicherheitshinweise

Press the S key
to change the displayed values for Seconds (S), Minutes
2
(M) or hours (H) in steps.
TIP: Press and hold the key to make the numbers change
more quickly.
Press the CLOCK (TIMER) key briefly, in order to confirm the
set time. The time does not flash.
Press M (12/24 HR) key
Activating the stopwatch
In Clock mode, press the START / STOP (MEMORY) key
The stopwatch begins in the bottom Section of the display
and shows the expired Seconds, Minutes and hours. The hun-
dredths of a Second are counted in the middle Section of the
display.
Press the START / STOP (MEMORY) key to halt the stopwatch
or to reactivate counting.
When you have halted the stopwatch, you can reset it to 0 by
pressing the CLEAR key

Timer mode

In Timer mode, 3 time fields appear. A timer is provided in each of
the three fields (Fig. D).
, the M (12 / 24 HR) key
4
to switch 12 or 24 HR mode.
3
.
7
or the H key
3
6
GB/CY
.
1
13