Auriol HG00151 Bedienungs- Und Sicherheitshinweise Seite 14

Setting the desired time
Press and hold the T1 key
the key flashes, thus signalling that a time can be set.
Press the S key
to change the displayed values for Seconds (S), Minutes (M)
or hours (H) in steps.
TIP: Press and hold the key to make the numbers change
more quickly.
Press the T1 key briefly to confirm your setting. The display of
Timer 1 stops flashing and shows the set time.
Set the timers next to the T2
way.
Activating set timers
The timer is in Timer mode and the selected timer displays the
selected time.
Press the T1 key
counter now begins counting down to 0. When the set time
has elapsed, a signal tone will sound for the period of one
Minute. The timer display flashes, the message „TIME'S UP"
flashes in the top left-hand corner above the timer and the
timer begins counting up.
Press the T1 key or the START / STOP (MEMORY) key
stop the timer's counting operation and the acoustic signal.
Press the CLEAR key
14 GB
for 3 Seconds. The field next to
10
, the M (12/24HR) key
4
and / or T3 keys
9
again to activate the topmost timer. The
10
to reset the counter to 0.
7
or the H key
3
in the same
8
6
2
to