Silvercrest 91033 Bedienungs- Und Sicherheitshinweise Seite 15

91033_silv_Heizkoerperthermostat_Content_HU-CZ-SK.indd 19
The RA and RAV adapters have been pro-
duced with pre-tension to aid better seating.
Use a screw driver during installation if neces-
sary and bend these gently upwards in the
area of the screw.
After they have been latched onto the
valve body, fasten the adapters with the
enclosed screw and nut (see fig. C).
Note: When installing, please ensure
that the spigots inside the adapter
in the same position as the indentations
on the valve.
Latch the adapter, which corresponds to
the valve, completely onto the valve body.
With the RAV type of valve, the tappet exten-
sion should be placed on the valve pin
15
before installation (see fig. D).
Note: When installing, please ensure that the
spigots inside the adapter
position as the indentations
14
are in the same
14
on the valve.
13
are
13
GB 19
09.07.13 11:07