Menu Options - Chauvet DJ Intimidator Beam LED 350 Schnellanleitung

Intimidator Beam LED 350 QRG

Menu Options

Main Level
DMX Address
Operation Modes
Pan
Tilt
Display
Channel Mode
Manual Pan Restrict
Manual Tilt Restrict
Reset
Load
Movement Speed
DMX Linking
Starting Address
Master/Slave
Connection
Programming Levels
d001~d512
SLAv (Son)
NASL (SLoU)
NAFA (FASt)
NStS (SrUn)
Normal Pan
Inverse Pan
Normal Tilt
Inverse Tilt
Normal Display
Inverse Display
14-Channel
Mode
8-Channel Mode
Pan 540°
Pan 360°
Pan 180°
Tilt 270°
Tilt 180°
Tilt 90°
rESt
LoAd
nous
The Intimidator Beam LED 350 can work with a DMX controller when
linked by DMX serial connections. Instructions for connecting and
configuring this product for DMX operation are in the User Manual. If you
are not familiar with DMX, download the DMX Primer from
www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 499.
The Intimidator Beam LED 350 uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this product
for Master/Slave operation are in the User Manual.
Note: The Intimidator Beam LED 350 can be connected in Master/Slave
with the Intimidator Spot LED 350, but the Intimidator Beam LED 350
must be put in Slow Mode for the products to sync correctly.
Do not change the Movement Speed on the Intimidator Beam LED 350
while the product is in motion. Stop the product before changing speeds.
Sets the DMX starting address
Slave operating mode
Automatic Mode, Slow Program
Automatic Mode, Fast Program
Sound Active Mode
PAn
Normal Pan operation
Inverse Pan operation
r PAn
tiL
Normal Tilt operation
Inverse Tilt operation
r tiL
diS
Change the LCD display text position
r diS
14CH
Selects the DMX personality
8CH
PA54
PA36 Select Pan angle restrictions
PA18
Ti27
Ti18
Select Tilt angle restrictions
Ti 9
Resets fixture
Load factory defaults
ins
Increasing speed
dES
Decreasing speed
5
Description
EN