Pentair SIATA V132 SFE-EV Viridion Bedienungsanleitung Seite 6

User Guide Siata V132-SFE-EV-VIRIDION
3.3. Description and components location
DOWN button
REGEN button
3.4. Bypassing
If the system is equipped with a bypass and if a problem occurs, turn the valves to bypass the system as shown in the picture
below.
Out
4 . Programming
Mandatory:
default).
Note:
The controller must be plugged to be programmed.
After 30 seconds without a button press, the unit returns to normal operation.
Note:
Menus are displayed in a defined and incremental order.
While the parameters are being edited, the
Access password
A
Press to enter the menu.
B
Use to modify the digit and
C
Press to validate the password.
Changing the password
A
Enter the menu.
B
Press and for 5 seconds.
C
Change the password using
D
Press to validate the new password.
Entering the basic menu
A
Press and release
B
Enter the password, see Access password, page 6.
Current time
A
Adjust the current time using
B
Press to validate and switch to the next parameter.
6 / 36
LCD display
UP button
Long manifold
Injector
Twin pilots
Normal
operation
In
The access to the controller operating parameters requires the input of a 4-digit code (0000 by
to pass to the next digit.
to modify the digit and
to access the basic menu.
to modify the digit and
Short manifold
Injector
External pilot connections
Out
icon is on and blinking.
to pass to the next digit.
to pass to the next digit.
Inlet
Meter
Drain
Outlet
In Bypass
In
Ref. MKT-UG-009 / C - 03.05.2018