Sharp MZ-1D05 Bedienungsanleitung Seite 6

~\,
~~~;;1~'~~' ~
)
(.~
1. Before connection, turn off the power of both the computer and the CRT display.
2. Connect the other end of the connecting cable (DIN connector) to the RGB connector on the rear panel of the
MZ-700 series main unit.
Note: The RGB terminal is the only display terminal on the MZ-710.
(MZ-700 series rear view) (MZ-1D05 rear view)
( • SpeciflcatlO.,..,:
Model name
Product name
CRT
Input signal
Deflection frequency
Display time
Display colors
Resolution
Power requirements
External dimensions
Weight
Accessories
MZ-1D05
Color display
14 inch, 90° deflection
Video signal separate R.G.B. system TTL level positive polarity.
H-hold signal TTL level negative polarity
V-hold signal TTL level negative polarity
Horizontal 15.625 kHz, Vertical 50.0 Hz
Horizontal 36.0 f.1s, Vertical 12.8 ms
8 colors (red, green, blue, yellow, cyan, magenta, white, black)
Horizontal 390 dots, Vertical 240 lines (non-interlaced)
AC Local voltage 50/60 Hz, 58 W
Width 364 mm x Depth 425 mm x Height 370 mm (Max.)
13.5 kg
1 instruction manual, 1 AC power cord
These specifications are subject to change without notice for improvements.
)