Sharp MZ-1D05 Bedienungsanleitung Seite 3

Introduction
Thank you for buying Sharp's color display
(MZ·1D05). Please read "this manual carefully for
proper use. Also, be sure to keep this manual for
later use. This manual should be helpful during
use or when problems arise.
• RGB direct drive system.
• 1000 character display capability.
Contents
PAGE
Features . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . .. 2
Names and functions of each part . . . . . . . . . 3
I nput signals . . . . . . . . . . . . . . . . . . . . . . . 4
Connection . . . . . . . . . . . . . . . . . . . . . . .. 5
Specifications . . . . . . . . . . . . . . . . . . . . . . 5
• 8 color display (red, green, blue, yellow, cyan, magenta, white, black).
• 58W low power consumption design.
• Since this unit contains precision parts such as ICs, do not place it in a location exposed to dust, humidity or
sudden changes in temperature.
• When disconnecting the power plug, always pull the plug itself and not the power cord. Also, turn off the
~ power switch before pulling the plug.
• When not in use for long periods of time, disconnect the power cord from the power outlet for safety.
• Be especially careful when handling the CRT. Do not hit or drop it. Do not turn it on its side or back. Do not
apply mechanical shock or vibration. Such abuse may become the source of trouble later.
• Do not place anything on this unit, as doing so may deform the cabinet.
• Never open the rear cover. There are several high voltage parts located within this unit. Do not touch anything
inside this unit as there is the danger of electric shock.
• Do not place anything magnetic such electric clocks near this unit. The magnetism may cause the screen to
flicker.
• Do not clean this unit with any volatile liquid such as alcohol, benzine or thinner. Use of a volatile liquid may
damage this unit. Always use a soft, dry cloth when wiping this unit. For cleaning of the internal parts,
consult your dealer.
• There may be times when a slight electric shock is felt when the CRT screen is touched. This is because the
CRT screen has a static electricity charge which does not affect the human body.
• To display a video picture on this unit, connect it with a computer using the connecting cable. This unit can·
not be used alone.