Sub-Zero ICB427 Installationsanweisung Seite 12

M O D E L S I C B 4 2 7
M O D E L S M O D E L S I C B 4 2 7
I C B 4 2 7
I C B 4 2 7 R
I N S TA L L AT I O N S P E C I F I C AT I O N S
2032 mm
ROUGH OPENING
HEIGHT
TO FINISHED
FLOORING
2019 mm
MIN HEIGHT
REQUIRED
64 mm
90˚
711 mm
DOOR CLEARANCE
NOTE: Door swing clearances are based on stainless
steel door and handle dimensions.
12
A N D I C B 4 2 7 R
A N D I C B 4 2 7 R
635 mm
ROUGH
OPENING
DEPTH
TOP VIEW
686 mm
ROUGH OPENING WIDTH
LOCATE ELECTRICAL
WITHIN SHADED AREA
114
mm
394 mm
E
ANTI-TIP BRACKET
FRONT VIEW
105˚
MAXIMUM
DOOR SWING
648 mm
889 mm
DOOR CLEARANCE
I N S TA L L AT I O N
S I T E P R E P A R AT I O N
Make sure that the finished rough opening
where the Wine Storage unit is to be installed
is properly prepared. Refer to the Installation
Specifications illustration for rough opening
dimensions, door swing clearance and electri-
cal placement for Models ICB427 and ICB427R.
IMPORTANT NOTE: To operate properly, the
door must open a minimum of 90 degrees.
Use a minimum 51 mm filler in corner installa-
tions to assure a 90-degree door opening.
Allow enough clearance in front of the unit for
full door swing.
IMPORTANT NOTE: Make sure the floor under
the unit is level with the surrounding finished
floor.
Do not load wine into the Wine Storage
unit until the installation is complete.
606 mm
648 mm