Interacoustics Equinox2.0 Gebrauchsanweisung Seite 451

Affinity Instruction for Use - EN
NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
(a)
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and
land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted
theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the measured field strength in the location in which the
AFFINITY is used exceeds the applicable RF compliance level above, the AFFINITY should be observed to
verify normal operation, If abnormal performance is observed, additional measures may be necessary, such
as reorienting or relocating the AFFINITY.
(b)
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
Page 75
vicinity of equipment marked with
the following symbol: