Recording Images On Av Equipment; Transferring Images To Computers (Image Input) - Canon RE-455X Bedienungsanleitung

Recording Images on AV Equipment

If you want to record using AV equipment, connect the RE-455X to the AV equipment using a commercially
available video cable. For operating details for the equipment being used, refer to the instruction manual
that came with the equipment.
(DVD recorder, VCR, etc.)

Transferring Images to Computers (Image Input)

If you want to transfer images from the RE-455X to a computer, you can do so by simply using a video cable
to connect the unit to an AV-capable computer. If your computer is not AV-capable, a video capture board is
required to convert the video signal (analog signal) to a digital signal suitable for a computer. Contact the
manufacturer of your computer or a store for details.
17
AV equipment
To VIDEO IN
terminal
Video cable
Rear panel
VIDEO S VIDEO RS-232C
OUT OUT
RGB OUT
RE-450X
NOTICE
When you use AV equipment with a S-video outlet, use a S-video cable to
connect to the S-video outlet. This will enable you to project high-quality
images.
Video cable
Computer
Use an XGA-compatible computer.
Check if your RE-455X model is uses
NTSC or PAL format, and use an AV
equipment compatible
appropriate format.
Video capture board
with the