Assembling, Storing And Connection - Canon RE-455X Bedienungsanleitung

2

ASSEMBLING, STORING AND CONNECTION

Assembling
Unfold and raise the pair of illumination lamps.
1
Raise the right-hand illumination lamp first, then the left-hand
illumination lamp (
Press the arm lock release lever, and raise the
2
arm until it stops.
Make sure to hold the arm when pressing the arm lock
NOTICE
release lever. If the lever is pressed without holding the arm,
the arm jumps up and may result in injury or malfunction.
Please raise the arm slowly.
Direct the camera head towards the document
3
table.
Remove the lens cap.
4
Keep the lens cap in a safe place.
/ ).
Arm lock release lever
E
8