Legamaster XTX-5500UHD Benutzerhandbuch Seite 20

OSD (ON-SCREEN DISPLAY) CONTROLS
SUB-MENU
UART Baudrate
Network
Dynamic IP
IP Address
Netmask
Gateway
DNS.
Save Settings
Refresh
Power Status Alert
Source Status Alert
Lost Status Alert
Load Default
MAC Address
6.2.6. Information
This read-only menu provides information on the
active sources and the latest firmware version
20
XTX-5500 – USER MANUAL – ENGLISH
DESCRIPTION
Adjust the baud rate of serial port (RS-232)
Enable network feature
Enable Dynamic IP mode
Set static IP address
Set subnet mask
Set gateway address
Set DNS address
Update the IP settings to net device.
Refresh dynamic IP info
Power change notification sent letters
Source change notification sent letters
Signal lost change notification sent letters
Load default network settings
MAC info
SETTINGS
115200 /38400 /19200 /9600
No / Yes
Disable / Enable (Disable)
255.255.255.255(0.0.0.0)
255.255.255.255(0.0.0.0)
255.255.255.255(0.0.0.0)
255.255.255.255(0.0.0.0)
No / Yes
Off / On
Off / On
Off / On
No / Yes
00:00:00:00:00:00
DEFAULT
115200
No
Disable
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
–
–
Off
Off
Off
–
00:00:00:00:00:00