Legamaster XTX-5500UHD Benutzerhandbuch Seite 18

OSD (ON-SCREEN DISPLAY) CONTROLS
Power LED
Enable or disable the status LED.
Options: On, Off
Default: On
RTC & Schedule
Set the internal clock of the display, and to turn on/
off the display at preset times.
Options: User mode, Workday mode, Everyday
mode
Default: User mode
18
XTX-5500 – USER MANUAL – ENGLISH
6.2.5. Advance Settings
Smart Light Control
Enable dynamic contrast (DCR) or ambient light
sensor
Options: Off, DCR, Light Sensor
Default: Light Sensor
IRFM
Create slight frame motion to help avoid image
retention
Options: On, Off
Default: Off
Noise Reduction
Reduce random noise in the video content
Options: Off, High, Medium, Low
Default: Off
Wake Up From Sleep
Change the behavior of Sleep Mode
Options: VGA Only, Digital/RS232/Ethernet;
Never Sleep
Default: VGA Only
EDID Switch
Select EDID (Extended Display Identification Data)
of the HDMI and DisplayPort inputs
Options: 1080p, 4K2K@
Note: Use the 1080p for the broadest support of lower
resolution sources. Use 4K2K to support high resolution
sources such as 3840x2160.
Touch Input Mapping
Select the touch port.
Options: Auto, OPS, Rear USB, HDMI3;
Default: Auto
Note: Auto will link Touch USB 1 to HDMI 1, 2, DisplayPort or
VGA and Touch USB 2 to HDMI 3. All other options will
force the touch input to that respective touch input