Installing An Expansion Card - ASROCK Fatal1ty X79 Professional Series Handbuch

Installing an expansion card

Step 1. Before installing an expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2. Remove the system unit cover (if your motherboard is already installed
in a chassis).
Step 3. Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
✁ ✂ ✄ ☎ ✆ ✝ ✞ ✟ ✠ ✡ ✁ ☛ ✂ ☞ ✌ ✍ ✎ ☞ ✏ ✡ ✡ ✂ ☞ ✁ ✏ ✍ ✑ ✟ ✁ ☛ ✁ ☛ ✂ ✒ ✞ ✏ ✁ ✌ ✡ ✎ ✄ ✍ ✂ ✒ ✒ ✓ ✍ ✔ ✞ ✕ ✖ ✡ ✁ ✟ ✞ ✁ ☛ ✂ ☞ ✌ ✍ ✎ ✟ ✒
completely seated on the slot.
Step 5. Fasten the card to the chassis with screws.
Step 6. Replace the system cover.
20
Fatal1ty X79 Professional Series Motherboard