Whispbar K427W Fitting Kit Montageanleitung Seite 9
Basisträgersystem
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
EN
Fitting Kit
K427W
Progressively tighten the clamp block
locking screws alternating from one side of
the vehicle to the other to tension evenly.
Check crossbar is securely attached to the
vehicle.
Use keys to fit and lock covers
CAUTION: Recheck all fasteners immediately after
a load is applied to the crossbars.
Regularly check screws are tight.
9
Inhaltsverzeichnis
