Werbung
Verfügbare Sprachen
Verfügbare Sprachen
D. Resharpen the knife in Stage 1 only when you cannot achieve satisfactory sharpness with a
few pulls through Stage 2.
E. This sharpener is supplied with an abbreviated set of instructions printed on an adhesive
backed plastic label. If you wish to keep these handy, remove backing and adhere to the top
surface of the motor housing. Replacement labels are available from EdgeCraft.
F. Replacement parts can be ordered from your local distributor or from the factory.
For customer service or assistance call 1-800-342-3255.
sErVicE
In the event post-warranty service is needed, return your sharpener to the EdgeCraft
factory where the cost of repair can be estimated before the repair is undertaken.
Please include on a separate sheet inside the box: your return address, daytime telephone
number and a brief description of the problem or damage to the sharpener. Retain a
shipping receipt as protection against loss in shipment.
11
Werbung
