Klarstein HEA-MKS-10 Handbuch Seite 10

Instruction of the Sliding Hinge
1, Use two self-screws to fix the sliding hinge.
2, After checking the suitable distance, use two self-screws to fix the bottom feet respectively.
1, If the refrigerator is closed, there should be have a distance of 1-2mm between the wooden cabinet door
and the surrounding.
2, There must be left a distance of 6-8mm between the wooden cabinet and the refrigerator door.
3, The maximum distance between the refrigerator's and the cabinet's hinge is about 40mm.
Changing the Swing Hinge
1, Pull out the three screws from right hinge.
2, Remove the hinge (upper and lower) away, find the following in the carton:
One left hinge cover
Two left hinges (up one and low one)
Three self-screws
3, Install the door in suitable position with left hinges, use three self-screws to fix them. Then put on the left
hinge cover.