Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Wires:
RED: = +VE (10-36V DC)
BLACK: = GND
YELLOW: = (Pattern Select, Synchronization and Reset) – Momentarily Connect to GND to cycle one by one through
the flash patterns. The patterns have Phase A and B. Connect all Yellow wires with units programmed in Phase A
and they will synchronise (up to 4 Beacons). Connect beacons programmed in Phase A and B and the units will flash
alternately. Connect to GND for 5 seconds and the flash pattern will be reset do default Double flashes pattern 4.
Flash Patterns:
Pattern No. Description
1
HEX: 60± 5 Flash per minute
Page 2 of 4
P/N 920-0552-00 (Rev A) 2017-03-27
© 2017 at ECCO
Phase
Other
N/A
Werbung
