Specifications - Makita BO4555 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Switch
4-1. Punch plate
4-2. Sandpaper
4-3. Guide
5-1. Velcro sandpaper
5-2. Base
6-1. Dust bag

SPECIFICATIONS

Model
Pad size
Orbits per minute (min
Dimensions (L x W x H)
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BO4555
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model BO4556
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model BO4557
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Explanation of general view
7-1. Groove
7-2. Front fixing cardboard
7-3. Front side of paper dust bag
8-1. Claws
8-2. Upper part
9-1. Notch
9-2. Guide
BO4555
-1
)
131 mm x 112 mm x 142 mm
) : 80 dB(A)
pA
) : 82 dB(A)
pA
) : 93 dB(A)
WA
) : 76 dB(A)
pA
BO4556
112mm ×102mm
131 mm x 112 mm x 141 mm
1.1 kg
ENE052-1
Model BO4558
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
ENF002-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BO4555
ENG905-1
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BO4556
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BO4557,BO4558
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
3
11-1. Holding tab
12-1. Dust box
12-2. Dust nozzle
13-1. Latch
13-2. Dust nozzle
BO4558
14,000
1.2 kg
/II
) : 79 dB(A)
pA
Wear ear protection
) : 2.5 m/s
h
2
) : 3.0 m/s
h
2
) : 3.5 m/s
h
2
BO4557
131 mm x 112 mm x 137 mm
1.0 kg
ENG900-1
2
or less
2
2
ENG901-1