Cd Playback; Selection Of A Specific Track - X4-TECH Bobby Joey Benjamin Blümchen Bedienungsanleitung

cd playback

» Switch the unit on by turning the VOL/ON control (see 6.17)
clockwise.
» Open the CD door (see 6.4) by lifting the recess OPEN (see 6.3).
Place a CD on the center spindle with the cover side faced up
and close the CD door.
» On the LCD display (see 6.1) the indication „- -„ will be shown
for a few seconds. Afterwards, the total number of tracks will
be displayed.
» Press PLAY/PAUSE (see 6.9) to start the playback. The track
number is indicated (e.g. „01").
» Adjust the volume by rotating the VOL/ON control (see 6.17) to
a suitable listening level.
» To interrupt the playback temporarily (pause), press PLAY/
PAUSE (see 6.9). Pressing PLAY/PAUSE again resumes the
playback.
» Press STOP (see 6.12) to stop the playback of the CD.

Selection of a specific track

During the playback you can skip with
to the next or previous track.
» Select the track in the playback, stop or pause mode with
(see 6.10) or
PAUSE (see 6.9).
» Pressing briefly on
Pressing this button repeatedly, you can skip several tracks
until the desired track number is shown on the display.
» Pressing briefly on
beginning of the current track.
» To skip back multiple tracks, press
(see 6.11) and start the playback with PLAY/
(see 6.10) you can skip to the next track.
(see 6.11) you will return to the
(see 6.10) or (see 6.11)
(see 6.11) repeatedly.
39